Porter-Cable FN250A 2-1/2-Inch 16-Gauge Finish Nailer Discount !!

With this 2-1/2-inch, 16-gauge finish nailer, Porter-Cable continues to make good on their reputation as one of the top pneumatic toolmakers. The gun's straight magazine is well thought out, made from aluminum, and top loading. This is a sturdy, compact nailer that shoots a conveniently wide range of 16-gauge nails, from 3/4 to 2-1/2 inches. The nailer has a good balance and a nice, thin grip made of porous rubber. (You don't have to have the hands of a giant to comfortably operate this gun.) The gun has a nicely designed depth-of-drive adjustment. There's also a muffled exhaust port, so it's quieter than a lot of other nailers--plus the exhaust port is adjustable, so you can direct the discharge where you want it. The gun's also lighter than we'd expected, always a good thing in a tool a lot of us use all day long. --Jon Groebner
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great tool... I don'tknow how I did without it!
The Porter Cable FN250A finish nailer is one of the best tools I have purchased. After spending many hours putting up trim in my house the old fashioned way - drill hole, drive nail, then set the nail, this nailer has made my life easier. You just hold the trim in place, set the nailer where you want and pull the trigger! The nail drives straight and properly recessed; it couldn't be easier since the tool is very light weight and easy to handle. I highly recommend this tool to anyone that is even the casual remodeler. I only wish that I had bought this a few years ago!

Click here to read the full review for more information about this product.

Porter-Cable FN250A
I have been building my own house now for the past 2 years, buying tools as I need them. I have several air-powered nailers. None compare with the ease of use the Porter-Cable brand offers. I particularly like the wide range of nail lengths and the depth adjustment capability. Many other brands have very limited ability to handle differing nail lengths. Adjusting the driven nail depth on other nailers requires adjusting air pressure or complicated affairs needing wrenches. The FN250A has solved these two issues nicely. I highly recommend it. Now, if they would only develop an interchangeable nailing head and nail cartridge rail . . .
A tough, flexible tool
I bought one of these nailers to help in building a large wooden fence. Loading nails and changing nail lengths is quick and easy, as is changing the depth setting. I've fired over 2,000 Paslode F-16 1.5" nails so far with no jams. My 1.5HP 3 gallon tank compressor easily keeps up with a rapid work pace. You won't need a larger compressor. I don't think you can go wrong with this nailer.


Rating : 4.4
List Price : $330.00

Available at Amazon : Check Saved Price Now !

Read more...

Porter-Cable DA250B 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer For Sale

Porter Cable’s redesigned angle nailer fires standard 15-gauge angled finish nails and brings along a list of improved features and benefits. For starters, Porter-Cable upped the nail capacity, taking nails from 1 inch to 2-1/2 inches. The streamlined body balances the ample magazine in the center of the handle rather than off to one side, offering better balance than most of its competitors. Another nice redo: the angled coupler minimizes interference with the air hose during reloading. The tool’s weight is down, too, from 6 pounds down to 4.2 pounds, thanks in part to a new Teflon cylinder and a high-impact plastic magazine. The magazine loads from the rear with a by-pass pusher you can reach from either side of the tool. A non-marring rubber nose tip (with on-tool storage) will protect your workpiece. This nailer comes with a restrictive trigger, but a bottom-actuated trigger kit is available from Porter Cable.--Kris Jensen-Van Heste
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Could be better
12/9/04 My company owns 3 of these and they really do have a strong shot. We had no problems with getting the nails to set in the toughest materials. Our problems came after 8 mos of use. One of the units began having frequent jams and then started misfiring on a consistent basis. I'm a little concerned because another one of our DA250B nailers has also become somewhat unpredictable and sometimes jams. I definitely recommend the DA250B over the Senco SFN 35 or any Bostich nailers. The Senco SFN 30 and 40 are OK units. My top pick however is the Dewalt Angled Finish Nailer D51275K. All of our crews like this nailer over any of the finish nailers we've used. (Bostich, Porter Cable DA250B, Senco SFN 35, 40, 30). I will say that for the infrequent user either The Porter Cable DA250B or Dewalt D51275K will perform nicely.
Note: We use these finish nailers primarily in oak but sometimes in wood species such as Brazilian Cherry, Mahogany, Rosewood, Maple and other exotic wood...

Click here to read the full review for more information about this product.

This tool is more powerful, than the 16 gauge finish nailer
I have been using Porter Cables 16 gauge finish nailer, and their 18 gauge finish brad nailer, for over a year now. It has performed great. I was doing some tongue and groove cedar on a wall, and wasn't able to get a the nail on the 16 to sit down flush in the upper corner of the tongue. I picked up one of these 15 gauge, the new DA250B, and this thing kicks butt. It is substantially more powerful, than the 16 gauge. POW, their is no mistake about it. What that amounted to, was the 16 gauge would not drive the nail all the way into the inaccessable corner of the tongue. When I tried it with the 15 gauge, it drove the nail in further, all the way to clean with the surface, down in the corner. The 16 gauge took it to the extent the tip would go, but the 15 gauge went beyond the restriction, all the way to a flush finish. So you could say, the tongue extends out farther on the 15, like beyond flush. It is not the air pressure, I'm running it on a 6HP 60 gallon tank, or the setting of...
light and right
I just bought this finish nailer this weekend and love it. I was putting kithchen cabinets and trim together and needed to use the whole range of nail lengths (1 - 2.5"). I used the depth-of-setting gauge several times and that was easy. It's got a soft air blow out which you can adjust the direction on w/o an allen wrench. It's light weight, really light, compared to most that I use on the job but feels solid at the same time. The 15ga nails are remarkably strong and that will be helpful when casings help to set jambs. Besides the overall ease of use (e.g. loading and changing nails) I appreciate the single-firing trigger... It is quite a safety feature which does not allow you to fire if you're depressing the trigger just a bit before you engage the plunger: less chance of double firing, less chance of accidents.


Rating : 4.3
List Price : $358.38

Available at Amazon : Check Saved Price Now !

Read more...

Stanley Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing On Sale

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

The Bostitch N66C-1 Coil Siding Nailer At a Glance: 515 in./lbs. of driving power Adjustable nail depth Lightweight, durable aluminum housing Tool-free adjustable exhaust

All-day siding jobs are easier on your hands thanks to lightweight magnesium housing. View larger.

Accepts both wire-weld and plastic-inserted coil nails from 1.25" to 2.5". View larger.

Works with a Variety of Siding Materials, from Soft Wood to Steel
Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use
Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. The N66C-1 stores in its included protective carrying case when not in use.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Siding nailer and carrying case.

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great gun
I bought this reconditioned, and I like both the saving, and the fact that someone looked over the tool. This winter I shot 10,000 plastic colated Hitachi nails through this gun without a single misfire. The company I worked with uses the Hitachi siding nailer, thats why the nailes were hitachi. And I bought a Bostitch nailer because it was both cheaper, and watching others with the Hitachi frustrated with jambing and misfires, helped me make my choice

Click here to read the full review for more information about this product.

great gun
We use this gun for cedar siding, trim boards, and plywood sheeting for both roofs and sidewall sheeting. The gun is light, reliable, durable, and easy to repair if you do abuse it. We have replaced an aircap and a top seal (the gun took a nose dive off a 3 story victorian roof) That said we have enjoyed using it and would recommend it. Can't think of a down side so a 5 star buy. One note if your I would recommend the wire collated over the plastic collated ...we have had issues with the little plastic trails that hangs onto the nail and sticks out around the head. Wire seams to be cleaner.
GREAT LIGHT WEIGHT GUN
I BOUGHT THIS PARTICULAR NAIL GUN FOR DOING CEDAR SHINGLE JOBS. ITS VERY LIGHT WEIGHT. VERY HELPFUL WHEN USING IT FOR 8 HRS A DAY FOR SEVERAL DAYS IN A ROW. I OWN OTHER BOSTITCH GUNS , NEVER HAVE ANY TROUBLE. PARTS ARE EASY TO GET IF NEEDED. NAILS FOR IT ARE AVILABLE ALMOST EVERYWHERE. PLUS ITS MADE IN U.S.A.

Product Features :

• 1-1/4-inch to 2-1/2-inch coil siding nailer with 500-pounds of driving power
• Drives wire weld and plastic collated coil nails; tool-free depth adjustment; directional exhaust
• Lightweight, durable aluminum housing
• Includes nailer and carrying case
• 4.4-pounds; 1-year warranty

Rating : 4.3
List Price : $399.00

Available at Amazon : Check Saved Price Now !

Read more...

Hitachi NT65M2 16 Gauge 1-Inch to 2-1/2-Inch Finish Nailer Big Discount

The Hitachi NT65M2S 16-Gauge 1-Inch to 2-1/2-Inch Finish Nailer is designed to meet the needs of the advanced do-it-yourselfer or the professional trim carpenter. This model's built-in air duster button permits air from the compressor to bypass the nailing function, so you can clear away dust from your work surface for better nail prep and a clearer view of your work area. Its compact, lightweight style is easy to hold and easy to aim, for precision nail placement that won't wear out your arms. Use this versatile nailer when installing molding, chair rails, cabinetry, or other fine finish applications. The NT65M2S comes ready to work, with a selective actuation switch that lets you fire sequentially or on contact, depending on the job and the application -- and no tools or additional parts are required to make the change. It also has a tool-less, easy-to-clear nose that makes removing nail jams simple, plus a tool-less depth of drive dial that adjusts for flush fastening in a variety of materials. If you want superior control and a professional-looking finish, this is the easiest way to get it. This nailer features a 360-degree, fully-adjustable exhaust port that blows air away from your face, a no-mar tip to protect your work surfaces, and an elastomer grip for better control and accuracy. It accepts fasteners from 1 to 2-1/2 inches, 16-gauge. It weighs only 3.7 pounds. It operates at 70-120 psi, and the magazine holds up to 100 fasteners. This model comes with safety glasses, 1/4-inch NPT male plug, no mar tip and carrying case. The Hitachi NT65M2S 16-Gauge 1-Inch to 2-1/2-Inch Finish Nailer comes with a 5-year limited warranty. Hitachi Power Tools provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting and fastening.The Hitachi 16-gauge finish nailer is designed to meet the needs of the advanced do-it-yourselfer or the professional trim carpenter. This model's built-in air duster button permits air from the compressor to bypass the nailing function, so you can clear away dust from your work surface for better nail prep and a clearer view of your work area. Its compact, lightweight style is easy to hold and easy to aim, for precision nail placement that won't wear out your arms. Use this versatile nailer when installing molding, chair rails, cabinetry, or other fine finish applications.

The NT65M2 comes ready to work, with a selective actuation switch that lets you fire sequentially or on contact, depending on the job and the application -- and no tools or additional parts are required to make the change. It also has a tool-less, easy-to-clear nose that makes removing nail jams simple, plus a tool-less depth of drive dial that adjusts for flush fastening in a variety of materials. If you want superior control and a professional-looking finish, this is the easiest way to get it.

This nailer features a 360-degree, fully-adjustable exhaust port that blows air away from your face, a no-mar tip to protect your work surfaces, and an elastomer grip for better control and accuracy. It accepts fasteners from 1 to 2-1/2 inches, 16-gauge. It weighs only 3.7 pounds. It operates at 70-120 psi, and the magazine holds up to 100 fasteners. This model comes with safety glasses, a tool fitting, no-mar tip, hex bar wrench, and a case.

What's in the box:
Hitachi 16-gauge finish nailer, tool fitting, safety glasses, no-mar tip, hex bar wrench, case.

Choosing a Pneumatic Nailer
For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins.

A Word on Air Compressors
All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set.

How Pneumatic Nailers Work
Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded.

Important Points to Consider
Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly.

General Features
Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

My best nailer
I have used this gun now to do quite a bit of siding, using wood siding and fiber cement trim. I have fired short finish nails and longer 2 1/2 inch nails (capacity). It has never, never jammed and never failed to fire if I remembered to turn on the compressor and to load in nails! There have been times that I drove a longer nail from one corner trim piece of fiber cement 1 X 6 into another and it didn't sink all the way, but it was silly of me not to change to shorter nails, so I don't blame the poor gun!

It's pretty, so you'll be tempted to treat it gently, but that isn't needed... it's a toughy!

Click here to read the full review for more information about this product.

Outstanding value and a pleasure to use
I'm building a log home and bought this nail gun to install the tongue and grove ceilings. I've used over 4,000 nails so far and have had absolutely no failures. It is light enough to operate overhead all day and at 80 psi will seat a 2" nail under the wood's surface. It fits the hand well and is fully adjustable without tools. The only negative I can find is that it has no way to hang it up while fitting a board. I use it with a small 2.5 HP, 4.2 CFM compressor and it will shoot 12 nails before cycling the unit. The nails are easily available on-line or at your local big-box store and this gun is not fussy about what brand you feed it. I liked it so well that I went back and bought it's big brother, the Hitachi framing nailer (but that is another review).
great nailer, but pricey
Pros:
-exhaust can be rotated (air in the face is annoying and dangerous)
-button to spray air (very handy for bleeding compressors at the end of the day)
-great weight and balance, extremely comfortable
-jam clearing mechanism is super easy to use (haven't had a jam yet though)
-very consistent depth of drive
-comes with air fitting pre-installed (no need to buy)

Cons:
-don't like the tip style as much as my other nailers
-no lockout mechanism to prevent dry fire

It's worked well for me on furniture projects, and I don't have any major complaints. It's a great nailer (maybe even the cadillac), but I probably wouldn't recommend it to any of my amateur woodworker friends, because they can get something else to do the job at a fraction of the cost (lots of good nailers on the market right now).

Five stars for quality and design, but only three stars for value. In the end, it's still a five star tool.

Product Features :

• 16-gauge finish nailer with selective actuation for sequential or bump firing
• 360 degree adjustable exhaust directs air away from the user
• Tool free depth of drive; easy clear nose; elastomer grip
• Includes tool fitting, safety glasses, no-mar tip, hex bar wrench, and case
• Weighs 3.7 pounds; 5-year manufacturer's warranty

Rating : 4.2
List Price : $338.10

Available at Amazon : Check Saved Price Now !

Read more...

Stanley Bostitch N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer Big SALE

Put the finishing touches on your projects with the Bostitch N62FNK-2 Angled Finish Nailer. A magnesium body makes this nailer durable and lightweight, and oil-free maintenance and an easy-load magazine make it easy to use. Adjustable settings let you set the perfect nail depth for the job, whether you're working with furniture, molding, or trim.

The Bostitch N62FNK-2 Angled Finish Nailer At a Glance: 400 in./lbs. of driving power Adjustable nail depth Lightweight, durable magnesium housing Includes 4 profile tips and 1,000 2-inch nails

1.25" to 2.5" nails are ideal for furniture projects or trim work. View larger.

With its lightweight magnesium body, this nailer is perfect for over-the-head jobs. View larger.

Angled profile tips help you drive nails at the proper depth and angle. View larger.

Give Your Home a Professional Finish
The N62FNK-2 Finishing Nailer is the perfect tool for tackling the detail work that makes your home stand out. Use this nailer with a standard air compressor to add trim around windows and doors, apply crown molding, or work on furniture projects. For a pristine finish, a choice of four angled profile tips ensures the perfect drive every time. Also, this nailer features oil-free operation, so it's easy to maintain and it won't stain your workpieces.

Adjustable to Match the Task at Hand
The N62FNK-2 has adjustable nail-depth settings and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job quickly and easily. And with a driving power of 400 in/lbs, you can easily set 15-gauge finishing nails into even the most challenging hardwoods with power to spare.

Additionally, the N62FNK-2 has a tool-free magazine that holds 130 nails (1.25-inches to 2.5-inches in length), so you can knock out plenty of work in a single load. For added convenience, the magazine removes easily for cleaning and jam clearing.

Lightweight, Durable Construction for Everyday Use
The magnesium construction of the N62FNK-2 Angled Finish Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. Measuring 3.13 x 11.63 x 14.69 inches (WxHxL) and weighing just 3.8 pounds, this tool is perfect for over-the-head jobs, such as mounting crown molding, hanging shutters, installing cabinets, and more.

When you've finished the job, the N66C-1 and profile tips store neatly in a protective carrying case.

The Bostitch N62FNK-2 Angled Finish Nailer is backed by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Finish nailer, 1,000 two-inch nails, carrying case, and four profile tips.

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great gun - EXTREMELY light
I bought this gun sight unseen (usually I go "touch" tools at the H--- D---- first, but they didn't have one) and am so far very pleased. When I took it out of the box, the first thing I noticed was how light it is. It's amazing. Here's my comments:

- The nail magazine is plastic and the housing is magnesium making this thing feel like a toy in your hand. I'm still a little skeptical about the plastic magazine and wonder if it would withstand the daily pounding of professional use (I'm only a heavy duty homeowner).

The good:

- The oil free engine is fantastic. No oil on your work and no need to remember to oil it.

- Easy to use and maintain.

- Pretty much jam free (I've shot plenty of nails through it already).

- VERY light.

The bad:

- Only shoots Stanley nails (PC and Senco shoot a different type of nail). Not a problem as I see it - [One home improvement store] sells them in boxes of 5000 (PC sells their nails in boxes of 1000).

- Plastic magazine - Not sure...

Click here to read the full review for more information about this product.

Duo-fast vs. Bostich
From the sound of these reviews, the gun seems to work pretty good for homeowners & such. I've been a carpenter for 40 years. I've been using finish nailers for about 20 years. My last nail gun was a Duo-fast. I finally retired it recently, after 17+ years of service. Since the local lumber yard carries Bostich nails, I went with Bostich. I've had the gun 18 months & the piston rod has broken 3 times. Replacing it myself still cost me $35.00 a pop. Anybody who has trimmed a door or window or installed baseboard, knows it's immpossible not to hit a screw head or sheetrock nail once in a while. Well, everytime I hit one, the piston rod breaks. It breaks in the exact same spot. It appears to made of cast aluminum or something, instead of hardened or stainless steel. I like the gun & am thinking about getting somebody to manufacture a functional rod for me, since Bostich doesn't know how.
Best Finish nailer under $1,000,000!
I have been shopping for a 15 or 16 gauge finish nailer for about six months. This Bostitch is the only 15 gauge angled nailer that I have found to be priced in the straight 16 gauge price range.
This is the best 15 gauge gun at any price. Just hold this gun in your hand and you will be convinced that you can't buy a better gun, period.
I had narrowed my choices down to the Bostitch, Porter-Cable and the new DeWalt.
The PC was nice, the price was right and I have had great success with my PC 18 gauge brad nailer, but the 15 gauge PC was way too heavy. Almost twice the weight of the Bostitch.
The DeWalt fit my small hands like a glove, was very light weight and within my budget (if I stayed with the straight nailer vs the angled model). However, I shyed away from the DeWalt models because the contact trip assembly had too many bends which didn't seem to operate as smoothly as the PC and Bostitch. The display model at a local hardware store already looked like it was...

Product Features :

• 1 1/4-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
• Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
• Durable, lightweight magnesium housing
• Includes no-mar tip, 4 profile tips, 1,000 fasteners, durable plastic carrying case
• 11.63-by-3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

Rating : 4.0
List Price : $370.14

Available at Amazon : Check Saved Price Now !

Read more...

Porter-Cable Pc1Pak 2-1/2-Inch Finish Nailer Compressor Combo Kit Promo Offer

This Porter combo kit includes a nailgun and a powerful compressor, everything you need to do the job. Great for molding & trim, furniture or other wood working projects.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Finish Nailer combo kit
Bought this product for some remodelling jobs and it has worked great right out of the box. Setup was easy and the ergonomic design is well done, with good balance for the tool and the compressor handle. Have driven over 1000 nails so far without a misfire or jam. Love it!

Click here to read the full review for more information about this product.

my Porter compressor
had a couple bathrooms, kitchen and small storage room to do shoe molding. Thought of getting some one to do it, then decided to
look for compressor and finishing gun to do it yourself. Selected this unit for the price and rating. Got it earlier than expected, setup and functionality was a breeze. For home use, mechanical repairs, tyre inflation, etc. It's great also easy to store away.
Simplicity
I've been using this for a few months now doing trim work on a small modular cabin. It doesn't get much easier than this. The compressor is virtually maintenance free and the only adjustments necessary are the regulator pressure on the compressor and the nail depth on the gun, both of which are no-brainers.

I had never used a pneumatic nailer before but I was up and running in about 10 minutes. That included reading the manual. I ran a few nails into a couple pieces of scrap to check/adjust nail depth and went to work.

When not in use, the hose can be wound up and placed in the included tool bag with the gun and put away neatly.

The one thing to be aware of is that the compressor motor is loud. Some might consider that a con but it doesn't matter to me.

Product Features :

• Innovative shroud allows for better protection and portability
• 150 psi max allows users to drive more nails than a traditional 135 max psi compressor
• 6 gal tank allows users to drive a large quantity of nails on a single tank charge
• 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217 34 lbs weight allows compressor to be easily carried
• 34 lbs weight allows compressor to be easily carried

Rating : 5.0
List Price : $505.76

Available at Amazon : Check Saved Price Now !

Read more...