Porter-Cable DA250B 1-Inch to 2-1/2-Inch 15-Gauge Angled Finish Nailer For Sale

Porter Cable’s redesigned angle nailer fires standard 15-gauge angled finish nails and brings along a list of improved features and benefits. For starters, Porter-Cable upped the nail capacity, taking nails from 1 inch to 2-1/2 inches. The streamlined body balances the ample magazine in the center of the handle rather than off to one side, offering better balance than most of its competitors. Another nice redo: the angled coupler minimizes interference with the air hose during reloading. The tool’s weight is down, too, from 6 pounds down to 4.2 pounds, thanks in part to a new Teflon cylinder and a high-impact plastic magazine. The magazine loads from the rear with a by-pass pusher you can reach from either side of the tool. A non-marring rubber nose tip (with on-tool storage) will protect your workpiece. This nailer comes with a restrictive trigger, but a bottom-actuated trigger kit is available from Porter Cable.--Kris Jensen-Van Heste
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Could be better
12/9/04 My company owns 3 of these and they really do have a strong shot. We had no problems with getting the nails to set in the toughest materials. Our problems came after 8 mos of use. One of the units began having frequent jams and then started misfiring on a consistent basis. I'm a little concerned because another one of our DA250B nailers has also become somewhat unpredictable and sometimes jams. I definitely recommend the DA250B over the Senco SFN 35 or any Bostich nailers. The Senco SFN 30 and 40 are OK units. My top pick however is the Dewalt Angled Finish Nailer D51275K. All of our crews like this nailer over any of the finish nailers we've used. (Bostich, Porter Cable DA250B, Senco SFN 35, 40, 30). I will say that for the infrequent user either The Porter Cable DA250B or Dewalt D51275K will perform nicely.
Note: We use these finish nailers primarily in oak but sometimes in wood species such as Brazilian Cherry, Mahogany, Rosewood, Maple and other exotic wood...

Click here to read the full review for more information about this product.

This tool is more powerful, than the 16 gauge finish nailer
I have been using Porter Cables 16 gauge finish nailer, and their 18 gauge finish brad nailer, for over a year now. It has performed great. I was doing some tongue and groove cedar on a wall, and wasn't able to get a the nail on the 16 to sit down flush in the upper corner of the tongue. I picked up one of these 15 gauge, the new DA250B, and this thing kicks butt. It is substantially more powerful, than the 16 gauge. POW, their is no mistake about it. What that amounted to, was the 16 gauge would not drive the nail all the way into the inaccessable corner of the tongue. When I tried it with the 15 gauge, it drove the nail in further, all the way to clean with the surface, down in the corner. The 16 gauge took it to the extent the tip would go, but the 15 gauge went beyond the restriction, all the way to a flush finish. So you could say, the tongue extends out farther on the 15, like beyond flush. It is not the air pressure, I'm running it on a 6HP 60 gallon tank, or the setting of...
light and right
I just bought this finish nailer this weekend and love it. I was putting kithchen cabinets and trim together and needed to use the whole range of nail lengths (1 - 2.5"). I used the depth-of-setting gauge several times and that was easy. It's got a soft air blow out which you can adjust the direction on w/o an allen wrench. It's light weight, really light, compared to most that I use on the job but feels solid at the same time. The 15ga nails are remarkably strong and that will be helpful when casings help to set jambs. Besides the overall ease of use (e.g. loading and changing nails) I appreciate the single-firing trigger... It is quite a safety feature which does not allow you to fire if you're depressing the trigger just a bit before you engage the plunger: less chance of double firing, less chance of accidents.


Rating : 4.3
List Price : $358.38

Available at Amazon : Check Saved Price Now !

Read more...

Bosch FNA250-15 15 Gauge Angled Finish Nailer Big Discount

Includes 15 Gauge 2-1/2-in Angled Finish Nailer - FNA250-15-RT, Carrying CaseThe Bosch FNA250-15 15-Gauge Angled Finish Nailer offers less down time, 10% more power, and twice the durability of its competition, giving you precise nail placement each and every time you use it. Featuring Bosch's exclusive "Full-Force Technology," this efficient tool is engineered to eliminate wasted power and space by distributing100% of the working energy directly to the fastener.

The FNA250-15 15 Gauge Angled Finish Nailer offers: "Full-Force Technology" for consistently flush results. A wide 60-120 psi operating range for small and large projects. Tool-less adjustments for quick, easy control.

The angled design makes for easy work in tight areas. View larger.

With "Full-Force Technology," 100% air power is sent to the fastener. View larger.

Bosch Full-Force Technology
This nailer is part of a new line of Bosch tools, which utilize Full-Force Technology to consistently drive nails flush, even in industrial lumber. This revolutionary engineering works without return chambers that add bulk and weight and create wasted energy on the strike.

When the trigger is pulled on the FNA250-15, air drives the piston down the cylinder. As the piston strikes, air is exhausted out the front of the tool for 100-percent air power and no wasted energy.

Angled Design for Hard-to-Reach Areas and Tight Corners
Thanks to its angled design, the FNA250-15 can get into tighter areas and more narrow spaces than other nailers. It's great for building cabinets, performing trim jobs, hanging doors, running baseboard or crown, installing railing, and much more.

Big Power in a Small Package
Measuring 3.13 x 10.0 x 11.75 inches (WxHxL) and weighing 4.0 pounds, the FNA250-15 is 20% smaller than other compact angled nailers on the market. Its slim body and narrow nose provide you with an excellent line of sight and maximum control, even on heavy-duty jobs. This nailer offers plenty of power; an operating range of 60-120 psi drives 1-1/4- to 2-1/2-inch 15-gauge nails and ensures that none are left standing.

Tool-Less Operation for Ease-of-Use
The FNA250-15 offers the ease of straightforward, tool-less operation. With this handy nailer you can make adjustments to the air exhaust, fine-tune the depth of drive, clear out jams with the quick-clear function, and switch between bump and sequential firing with the selectable trigger--all without the need for a wrench or additional tools.

An added bonus, no-mar tip storage means everything you need to complete your work is protected and close at hand.

Prevents Tool Damage
To help ensure long-term, reliable use, the FNA250-15 boasts a dry fire lock-out, which prevents damage to the workpiece and the tool's internal components by eliminating blank firing. Additionally, this nailer comes equipped with an inline self-cleaning air filter that keeps debris away from the valve and O-ring, preventing wear, tear, and compromised performance.

The FNA250-15 comes with a one-year unconditional warranty.

What's in the Box
Nailer, one pair of safety glasses, one no-mar tip, and carrying case.

For more information, click on the images below
Bosch Nail Guns and Compressors
SN350-20F Full Head Framing Nailer	SN350-34C Clipped Head Framing Nailer	FNA250-15 15 Gauge Angled Finish Nailer	FNS250-16 16 Gauge Angled Finish Nailer	BNS200-18 18 Gauge Brad Nailer	STN150-18 18 Gauge Narrow Crown Stapler
RN175 Coil Roofing Nailer	CGT8-65W 8 Gallon 6.5 HP Gas Wheelbarrow Air Compressor	CET8-15W 8 Gallon 1.5 HP Electric Wheelbarrow Air Compressor	CET3-10 3 Gallon Electric Hand Carry Compressor	CET4-20 4 Gallon Electric Hand Carry Compressor	CET4-20W 4 Gallon Electric Compressor w/ Wheels

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Bosch 15 Gauge Nail Gun
Please be very careful when ordering through Amazon.com. I ordered a Bosch 15 Gauge nail gun for my husband and when I ordered it and received all my confirmations it was suppose to be a NEW nail gun. All of the paperwork affirmed a new gun. I received the product a few days later and it was a reconditioned nail gun. I called Amazon, and they told me to call CPO Bosch because it is there product. I called CPO Bosch and was re-directed back to Amazon because, of course, it was there fault. Cat and mouse back and forth with no luck. My husband said he likes the nail gun very much. Says it is very well built and would recommend it to anyone. It has a good feel in your hands and is small enough to get into corners for nailing trim work. He is satisfied with the nail gun, but wishes they would uphold there listing of a NEW nail gun and not send people reconditioned products when they are not aware they are reconditioned.

Click here to read the full review for more information about this product.

Fine tool
The Bosch FNA250-15 is a solid, light, easy to use finish nailer that will satisfy all of my finishing needs. I'm re-attaching finished molding in an old house. The nailer puts the nail exactly where I want it and goes in so fast that even a small delicate piece does not split. Its a simple, honest mechanism that does the job for which it's intended. Careful, though, it does not come with pneumatic oil and the manual clearly states that it needs a few drops before each use. As usual, Amazon.com was an ease and a pleasure to deal with. The primary supplier from which the nailer came, Wurth Baer Supply Company was prompt and excellent, as well, delivery being exactly when they said it would be.
Doesn't set nails
I don't know what's with the new guns or what? I'm having a problem finding a nail gun that sets the nails deep enough, and yes I have enough air pressure and my older guns work fine. I also hadn't even tried it on hardwood, only poplar. I had same problem with a very very nice Ridgid gun I purchased at Home Depot only to return it, same as I did with this Bosch FNA250 angled nailer. I find if you push really really hard it will set most the time ok, but that is without the rubber non marring pad. These depth adjustments are somewhat of joke anyway, from barely full penetration to leaving the nail sticking out 3/8 of an inch. Who would ever want a finish nail to stick out that far? Maybe just maybe for some extreme rare occasion someone might want it to be flush. Or it might be these are designed for Styrofoam installers.

Otherwise besides that quirk and the fact that it is a bit on the loud side similar to the Hitachi, it would have been a very nice gun. One more thing,...

Product Features :

• Tool-less Adjustable Air Exhaust
• Tool-less Selectable Trigger - Easily Switch between bump and sequential fire
• Tool-less adjustable depth of drive - Adjust depth of drive on tool
• Narrow Nose for Excellent Line of Sight and Slim Body for Better line of sight and better control
• In-line self cleaning air filter - Keeps debris from the valve and o-ring improving life of tool

Rating : 3.8
List Price : $369.00

Available at Amazon : Check Saved Price Now !

Read more...

Astro AP 1715 Deluxe Air Blow Gun with 13-In Long Angled Nozzle For Sale

??? Astro Pneumatic Tools 1715 Deluxe Air Blow Gun with 13" Long Angled Nozzle with 1/2" Removable Rubber Tip??? Ergonomic grip ??? Angled Blow Gun nozzle easily gets into tight places??? New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications??? Comfortable lever control and insulated handle??? High impact plastic body with built-in hanger slot??? Brass air inlet prevents wet air rust??? Air Blow Gun Inlet Thread NPT: 1/4"??? Air Blow Gun Pressure: 90-120psi??? Blow Gun Temperature Range: -40?? to 80??C??? Questions about the Astro Pneumatic Automotive Tools 1715 Deluxe Air Blow Gun with 13" Long Angled Nozzle with 1/2" Removable Rubber Tip? E-mail us
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

great
works better then i thought! the rubber tip is a great add on and if i need another one of these i know where to go

Click here to read the full review for more information about this product.

Product Features :

• Deluxe Air Blow Gun with 13" Long Angled Nozzle & 1/2" Removable Rubber Tip

Rating : 5.0
List Price : $18.72

Available at Amazon : Check Saved Price Now !

Read more...

Stanley Bostitch N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish Nailer Big SALE

Put the finishing touches on your projects with the Bostitch N62FNK-2 Angled Finish Nailer. A magnesium body makes this nailer durable and lightweight, and oil-free maintenance and an easy-load magazine make it easy to use. Adjustable settings let you set the perfect nail depth for the job, whether you're working with furniture, molding, or trim.

The Bostitch N62FNK-2 Angled Finish Nailer At a Glance: 400 in./lbs. of driving power Adjustable nail depth Lightweight, durable magnesium housing Includes 4 profile tips and 1,000 2-inch nails

1.25" to 2.5" nails are ideal for furniture projects or trim work. View larger.

With its lightweight magnesium body, this nailer is perfect for over-the-head jobs. View larger.

Angled profile tips help you drive nails at the proper depth and angle. View larger.

Give Your Home a Professional Finish
The N62FNK-2 Finishing Nailer is the perfect tool for tackling the detail work that makes your home stand out. Use this nailer with a standard air compressor to add trim around windows and doors, apply crown molding, or work on furniture projects. For a pristine finish, a choice of four angled profile tips ensures the perfect drive every time. Also, this nailer features oil-free operation, so it's easy to maintain and it won't stain your workpieces.

Adjustable to Match the Task at Hand
The N62FNK-2 has adjustable nail-depth settings and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job quickly and easily. And with a driving power of 400 in/lbs, you can easily set 15-gauge finishing nails into even the most challenging hardwoods with power to spare.

Additionally, the N62FNK-2 has a tool-free magazine that holds 130 nails (1.25-inches to 2.5-inches in length), so you can knock out plenty of work in a single load. For added convenience, the magazine removes easily for cleaning and jam clearing.

Lightweight, Durable Construction for Everyday Use
The magnesium construction of the N62FNK-2 Angled Finish Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. Measuring 3.13 x 11.63 x 14.69 inches (WxHxL) and weighing just 3.8 pounds, this tool is perfect for over-the-head jobs, such as mounting crown molding, hanging shutters, installing cabinets, and more.

When you've finished the job, the N66C-1 and profile tips store neatly in a protective carrying case.

The Bostitch N62FNK-2 Angled Finish Nailer is backed by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Finish nailer, 1,000 two-inch nails, carrying case, and four profile tips.

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great gun - EXTREMELY light
I bought this gun sight unseen (usually I go "touch" tools at the H--- D---- first, but they didn't have one) and am so far very pleased. When I took it out of the box, the first thing I noticed was how light it is. It's amazing. Here's my comments:

- The nail magazine is plastic and the housing is magnesium making this thing feel like a toy in your hand. I'm still a little skeptical about the plastic magazine and wonder if it would withstand the daily pounding of professional use (I'm only a heavy duty homeowner).

The good:

- The oil free engine is fantastic. No oil on your work and no need to remember to oil it.

- Easy to use and maintain.

- Pretty much jam free (I've shot plenty of nails through it already).

- VERY light.

The bad:

- Only shoots Stanley nails (PC and Senco shoot a different type of nail). Not a problem as I see it - [One home improvement store] sells them in boxes of 5000 (PC sells their nails in boxes of 1000).

- Plastic magazine - Not sure...

Click here to read the full review for more information about this product.

Duo-fast vs. Bostich
From the sound of these reviews, the gun seems to work pretty good for homeowners & such. I've been a carpenter for 40 years. I've been using finish nailers for about 20 years. My last nail gun was a Duo-fast. I finally retired it recently, after 17+ years of service. Since the local lumber yard carries Bostich nails, I went with Bostich. I've had the gun 18 months & the piston rod has broken 3 times. Replacing it myself still cost me $35.00 a pop. Anybody who has trimmed a door or window or installed baseboard, knows it's immpossible not to hit a screw head or sheetrock nail once in a while. Well, everytime I hit one, the piston rod breaks. It breaks in the exact same spot. It appears to made of cast aluminum or something, instead of hardened or stainless steel. I like the gun & am thinking about getting somebody to manufacture a functional rod for me, since Bostich doesn't know how.
Best Finish nailer under $1,000,000!
I have been shopping for a 15 or 16 gauge finish nailer for about six months. This Bostitch is the only 15 gauge angled nailer that I have found to be priced in the straight 16 gauge price range.
This is the best 15 gauge gun at any price. Just hold this gun in your hand and you will be convinced that you can't buy a better gun, period.
I had narrowed my choices down to the Bostitch, Porter-Cable and the new DeWalt.
The PC was nice, the price was right and I have had great success with my PC 18 gauge brad nailer, but the 15 gauge PC was way too heavy. Almost twice the weight of the Bostitch.
The DeWalt fit my small hands like a glove, was very light weight and within my budget (if I stayed with the straight nailer vs the angled model). However, I shyed away from the DeWalt models because the contact trip assembly had too many bends which didn't seem to operate as smoothly as the PC and Bostitch. The display model at a local hardware store already looked like it was...

Product Features :

• 1 1/4-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
• Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
• Durable, lightweight magnesium housing
• Includes no-mar tip, 4 profile tips, 1,000 fasteners, durable plastic carrying case
• 11.63-by-3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

Rating : 4.0
List Price : $370.14

Available at Amazon : Check Saved Price Now !

Read more...

Astro Pneumatic 1716 Deluxe Air Blow Gun with 20-Inch Long Angled Nozzle and 1/2-Inch Removable Rubber Tip For Sale

The Astro Pneumatic 1716 Deluxe Air Blow Gun with 20-Inch Long Angled Nozzle and 1/2-Inch Removable Rubber Tip features a new and improved valve design which makes this blow gun more convenient, faster, and easier to use for all applications. It includes an ergonomic grip, comfortable lever control and insulated handle. Its superb design features a high impact plastic body with built-in hanger slot as well as an angled nozzle which allows the user to easily get into tight places.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

ASTRO PNEUMATIC 20" DELUXE BLOW GUN
FAST SHIP. PROFESSIONAL PACKAGING. IF YOUR NEED IS FOR LONG REACH, WELL FOLKS THIS IS THE ONE. EVEN THOUGH I MANAGE A MULTI-MILLION DOLLAR NATIONALLY RECOGNIZED AUTOMOTIVE STORE, I ACTUALLY PURCHASED THIS FOR MY OWN PERSONAL USE.I HAPPEN TO BE AN EXTREMELY FUSSY INDIVIDUAL AND THE REASON I PURCHASED IT WAS THAT AFTER I WASHED MY MERCEDES I WANTED TO USE THE BLOW GUN TO REMOVE THE WATER OFF THE CAR FOR FASTER DRYING AND WIPING. WITH THE 20" REACH, IT MADE MY JOB SO MUCH EASIER WITHOUT THE WORRIES OF SCRATCHING THE FINISH, ESPECIALLY MINE. WORKS GREAT, SIMPLE TO USE AND MAKES MY JOB SO MUCH EASIER, MOST OF ALL, YOU CAN'T BEAT THE PRICE. DON'T HESITATTE BUY IT. YOU WILL LIKE IT.
ANTHONY
BURLINGTON, MA.

Click here to read the full review for more information about this product.

Product Features :

• New, improved valve design makes this blow gun more convenient, faster, and easier to use for all applications
• Comfortable lever control and insulated handle
• Ergonomic grip
• High impact plastic body with built-in hanger slot
• Angled Nozzle easily gets into tight places

Rating : 5.0
List Price : $15.43

Available at Amazon : Check Saved Price Now !

Read more...

4" Angled Nozzle Air Blow Gun w/ Comfort Grip Handle Big Discount

Air blow gun with 4" angled nozzle and comfort grip handle. Air blow guns design allows for precise control of air flow and direction. Ideal for hobby, crafts, or any situation that precise air control is needed. Recommended working air pressure is 90-120 PSI. 1/4" NPT. fitting.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great buy for the price.
While I do 95% of my own car maintenance/repairs, I mainly bought this to clean off my R/C car. It does its job just great. The quality seems to be decent. The action on the grip trigger is smooth and easily controllable for flow. You can choose to run this blow gun with or without the rubber tip. All in all, this may be my favorite "cheap" air tool purchase.

Click here to read the full review for more information about this product.

4" Blow Gun
I bought this to use to blow off the engine in my John Deere 300, It works as I expected. Good


Product Features :

• Air blow gun with 4" angled nozzle and comfort grip handle.
• Air blow guns design allows for precise control of air flow and direction.
• Ideal for hobby, crafts, or any situation that precise air control is needed.
• Recommended working air pressure is 90-120 PSI.
• 1/4" NPT. fitting.

Rating : 5.0
List Price : $19.99

Available at Amazon : Check Saved Price Now !

Read more...

Bosch CET4-20W 4-Gallon 2-HP Wheeled Twin Angled Tank Air Compressor Discount !!

Includes 2.0 HP 4 Gallon Oil-Lube Angled Twin Tank Wheeled Air Compressor - CET4-20W-RTThe Bosch CET4-20W Four-Gallon, Two-HP Wheeled Twin-Angled Tank Air Compressor is easy to transport and use, yet tough enough to withstand heavy-duty jobsite conditions. This CSA-certified compressor has a four-gallon tank and requires only 10 seconds of recovery time. It's specially designed to eliminate common air-compressor complaints and to provide a high level of user comfort.

The CET4-20W Four-Gallon, Two-HP Wheeled Twin-Angled Tank Air Compressor offers: 10-inch pneumatic tires for easy, balanced mobility. Angled "EZ Drain" system for effortless draining. 3,400 RPM induction motor for powerful performance.

An oil-lubed pump adds durability and a cold-start valve averts weather damage. View larger.

Vertically angled tanks allow for easy draining and balance the compressor for portability. View larger.

Vertically Angled Tanks for Your Comfort
Other air compressors can cause discomfort because they lack balance, and their exposed motor and components make them difficult to carry. But the CET4-20W is comfortable to use, because it features vertically angled tanks that are ergonomically balanced. And because this compressor stays close to your body, it provides a natural center of gravity. Additionally, the roll cage and recessed, easy-access control panel protect you from exposure to the regulator, gauges, coupler, and drain valve.

Compact Size and 10-Inch Pneumatic Tires for Portability
Unlike large wheeled compressors that hold the majority of their weight in front, the CET4-20W is balanced, measuring 7.75 x 19.75 x 16.25 inches (WxHxL) and weighing 84.9 pounds. It's compact, lightweight, and even enough for effortless movement around the jobsite. It also boasts 10-inch pneumatic tires and an easy-folding handle to further enhance portability.

EZ Drain System for Fast, Efficient Draining
To ensure that the tanks drain properly, and to prevent a decrease in compression that can cause a decrease in productivity and performance, the CET4-20W boasts Bosch's "EZ Drain" system. First, the tanks are slightly angled to allow water to collect at their bottoms. Second, the drain system is connected to both tanks to allow for easier draining. Finally, with pressure in the tanks, you can simultaneously drain them both by turning the ball valve located in the control panel.

Powerful Induction Motor and Cold-Start Valve for Professional Performance
The CET4-20W owes its robust performance to a powerful two-pole induction motor that spins at a speed of 3,400 RPM. This motor provides a dBA of 80 to cut down on distracting noise when you're working close to the compressor. There's also a cold-start valve that prevents the compressor from blowing a fuse in cold weather.

Additionally, a contractor-grade, oil-lubed pump ensures durability and extends tool life. The CET4-20W comes with an industry-leading, two-year pump warranty.

Safety-Relief Valve, Air Filter, and Dipstick for Additional Protection
In addition to its protective design, the CET4-20W features a safety-relief valve to prevent failures by relieving pressure from the system when compressed air reaches a predetermined level. And to prevent dirt and debris from compromising performance or durability, an air filter cleans the air coming into the pump. Finally, an oil dipstick lets you know exactly how much oil is left in the tank, so it's always clear when it's time to refuel.

Straightforward, User-Friendly Operation
The CET4-20W has an easy-to-read tank pressure gauge that lets you know the amount of pressure available, as well as a regulator that allows you to easily set the right level for driving nails. Additionally, two couplers are located on the tool's front for fast, uncomplicated hose attachment. For added convenience, the CET4-20W requires just 10 seconds of recovery time.

What's in the Box
Compressor with oil in the pump.

For more information, click on the images below
Bosch Nail Guns and Compressors
SN350-20F Full Head Framing Nailer	SN350-34C Clipped Head Framing Nailer	FNA250-15 15 Gauge Angled Finish Nailer	FNS250-16 16 Gauge Angled Finish Nailer	BNS200-18 18 Gauge Brad Nailer	STN150-18 18 Gauge Narrow Crown Stapler
RN175 Coil Roofing Nailer	CGT8-65W 8 Gallon 6.5 HP Gas Wheelbarrow Air Compressor	CET8-15W 8 Gallon 1.5 HP Electric Wheelbarrow Air Compressor	CET3-10 3 Gallon Electric Hand Carry Compressor	CET4-20 4 Gallon Electric Hand Carry Compressor	CET4-20W 4 Gallon Electric Compressor w/ Wheels

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Awesome air!
I bought this to replace my old dewalt air compressor and I could not have gotten a better replacement. After bolting on the wheels and 20 minute break in period your in buisness. This compressor pumps up and recovers very fast. I like the center drain valve as it makes draining the tanks a walk in the park. The pneumatic wheels make moving this compressor around the jobiste a breeze. If your looking for a mobile compressor that recovers fast this the compressor for you!

Click here to read the full review for more information about this product.

High quality, well designed
I have never had a compressor and after shopping around and comparing features and benefits for my use as a cabinet maker/finish carpenter I felt this compressor would suit my needs.
I do store this in my basement and regularly haul it up stairs to a site and it's heavy but very well made. The dials are clear, and the pneumatic wheels attach to the frame much more solidly than the wheels on Bosch's Airsweep vacuum for example.
I use a variety of pneumatic tools - in 16gauge to 23 gauge staplers and nailers on a 50 ft hose and it has performed flawlessly.
The slow start motor is a great advantage in homes that have circuits that are close to max but it will pop 15 amp fuses if there is any other load on them so beware of the power requirements. As a safety feature (???) the compressor has a fuse called a thermal protector that will pop if the machine is overloaded when you do not use the on/off lever to restart. This thermal protector must be manually reset for the...
Well worth the price
Being a carpenter in the north east I require a pretty heavy duty compressor that is low maintenance and can start up all year round. I shopped around before going with the Bosch, and it definitely lives up to expectations. I had already purchased a new Bosch (FNA250) angled finish nailer and was very impressed with their new technology, basically lighter and smaller, with more power. This compressor stood out from the other twin tank models for several reasons but mainly because of it's mobility and good strong design.

I like the fold down handle for storage, it fits right under my work bench no problem. And when extended you can wheel it around without bending over, unlike the Dewalt and Makita model. The wheels are pneumatic and high quality, and allow it to go right up stairs. Also it has two intelligently placed handles at the bottom of the two tanks and one on top for one and two man operations. Overall it is relatively light for its size, but I almost have never had...

Product Features :

• Vertically Angled Tanks-Enables better center of gravity for easy transport through-out the jobsite
• EZ Drain - One ball valve drain located in control panel for simultaneous draining of both tanks.
• Roll Cage - for maximum durability and protection from job-site conditions
• Recessed Control Panel-All gauges, regular, couplers, safety valve and drain valve are located in easy to access location and are protected from job-site conditions.
• Oil Lubed Pump-Extends product life for extra durability.
• 4.9 CFM.

Rating : 4.2
List Price : $654.00

Available at Amazon : Check Saved Price Now !

Read more...