Porter-Cable NS100B 1/2-Inch to 1-Inch 18-Gauge Crown Stapler SALE

The Porter-Cable NS100B 1/2-inch to 1-1/4-inch 18-gauge Crown Stapler comes with a long-life, maintenance-free motor for added reliability and an internal piston catch for consistent maximum power on every shot. This stapler drives 18-gauge staples with a 1/4-inch crown from 1/2 to 1 inches in length. Its rear exhaust keeps contaminates away from the work and a tool-free depth-of-drive adjustment with detents for proper setting of staples adds ease of use. Other features include a split-nose design for easy removal of jammed staples, a sequential style trigger with lock off switch, and a removable non-marring nose tip. Operating at 70-to-120 PSI for added versatility, this stapler also features an adjustable belt hook, an integrated rubber grip, a lightweight die-cast aluminum body for improved comfort, a low staple reload indicator, a special hardened driver blade, and a 100-staple magazine capacity. This tool measures 8.76 x 10-1/4 inches and weighs 2.6 pounds. This stapler comes with 1,000 18-guage 1-inch staples, a 1/4-inch fitting, safety glasses, and a carrying case.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

SO FAR SO GOOD
January 21, 2012.

If this Porter Cable staple gun works for a very long time without breaking down, I will be most satisfied. I am building a boat and have a way to go.

The gun is very lightweight and easy to handle. It loads easily. I am using 5/8" staples. Press the release, slide the slide open, and load staples. Close the slide and allow it to snap shut. In front of the trigger a wheel allows the operator to set the staple deeper or shallower into the material, depending on use.

I purchased poly line separately and hooked up to a tiny compressor. After shooting ten or so staples the compressor turns on but manages to always keep up.

AUGUST 30, 2012 UPDATE:

After firing 21,000 staples, the gun broke. But to be fair with Porter Cable, I must add that I work with epoxies and use the gun to staple down plywood that has been epoxied. Therefore epoxy gets on and in the firing point of the gun. When purchasing a new stapler, I...

Click here to read the full review for more information about this product.

Great little stapler
Works very well at the prescribed air pressure. It never misses a lick. I use this gun every day building cabinets, jewelry boxes and other things. I have the 18ga brad nailer as well. The perfect pair in my little shop.
Crown Stapler
As advertised, looks good, well made, light cannot wait to start using it matches the other Porter Cable Tools I have.

Product Features :

• Long life maintenance-free motor to keep from staining the work surface
• Internal piston catch for consistent max power on every shot
• Rear exhaust to keep contaminants away from work
• Drives 18 ga. staples with 1/4-inch crown from 1/2-inch to 1-inch length Tool-free depth-of-drive adjustment with detents for proper setting of staples
• Included with stapler: 1,000 18-guage 1-inch staples, 1/4-inch fitting, safety glasses, and carrying case

Rating : 4.8
List Price : $167.74

Available at Amazon : Check Saved Price Now !

Read more...

Campbell Hausfeld 3/8-Inch to 1-1/4-Inch 18-Gauge Narrow Crown Air Powered Stapler: Model CHN10399 Big Discount

Whether you’re tired of that manual stapler or just ready to upgrade, this 18-gauge pneumatic crown stapler from Campbell Hausfeld offers a world of user-friendly features for stapling delicate trim work, light cabinet assembly, and more. This versatile stapler accepts a wide range of staples from 3/8- to 1-¼ inches in length. The narrow, ¼-inch staple width provides steadfast attachment with minimal surface impact. An adjustable depth control offers precision countersinking or flush stapling at your fingertips for stapling trim of varying thicknesses or fastening upholstery to hardwood furniture. A multi-directional exhaust is easy to adjust; keeping discharge out of your face and off the workpiece so you can focus on the stapling. A quick-clear nose means easy jam clearing for less downtime and more productivity. And, a non-marring tip will not dent the work surface for better looking cabinets, upholstery, furniture and trim. Best of all, a rubber comfort grip and sequential trigger make repetitive tasks like underlayment installation and upholstering a breeze. --Brian D. Olson

What’s in the Box
Crown stapler, 1-inch finishing staples, male plug, 2 hex wrenches, tool oil and carry case
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

questionable quality, but works well
Questionable quality. I've had the gun just over a month and found it easy to use, lightweight, nice balance. I was fairly impressed. Then it just quit working, I'm guessing a seal ruptured somewhere inside b/c it just leaks instead of firing.
If I could get hold of someone at customer service I would find out what is wrong for sure, but they don't answer the phone, even during their limited office hours, and seemingly don't respond to their email. I'm sure it's still under warranty, but probably won't be by the time I finally get hold of someone.

UPDATE:
The leak was apparently the result of a seal getting dry on the shelf and coming unseated. It was a quick DIY fix. Since then, I've been using it regularly without any problems or complaints. I'd change the rating to a 4* if I could.

Click here to read the full review for more information about this product.

It's cheap but works fine
I wanted a cheap stapler that works well enough for my needs (occasional use). This really fits the bill. I have other Campbell Hausfeld air nailers and they all work fine.
Bargain Stapler is a Wowser
This Little beauty is way more than I expected. I've only had it a short time but it is seemingly well made, performs very well and has features like the depth adjustment for the amount of penetration into the wood, which allows for proper use on both soft and hardwoods, and a very ergonomic soft grip handle. I highly recommend it. I don't think that, for the price, it can be beat.

Product Features :

• 3/8- to 1-1/4-inch 18-gauge narrow crown stapler
  
  1/4" male industrial plug (1/4" NPT)
• Adjustable depth guide; quick-release nose door for fast jam clearing
• Non-marring tip will not dent the work surface. Adjustable exhaust
• Includes 1000 1-inch finishing staples, male plug, 2 hex wrenches, oil, carry case
• 3-year warranty

Rating : 4.4
List Price : $71.99

Available at Amazon : Check Saved Price Now !

Read more...

Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler For Sale

The Porter-Cable US58 1/4-Inch to 5/8-Inch, 22-Gauge C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of useful features. It uses standard Senco C Type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Great stapler, but a word of caution
Light and effective. It does its job as well as I could have hoped. Not a single jam that was not obviously my fault. I have spent several times the cost of this tool looking for a stapler that would do what this one does as well as it does. Why the enthusiasm? Well, most staplers not meant for construction site abuse are not very good. This one is.

A word of caution. This is not, nor was it ever intended to be, a construction stapler. The staples it is designed to use are not big enough nor thick enough to be of much use for construction site purposes. This is a professional grade upholstery stapler.

Click here to read the full review for more information about this product.

Where to get staples
This gun is very comparable to other industrial upholstery staplers in features, design and quality, but it is considerably less expensive.

Since this is an upholstery stapler you can get staples from any upholstery supply shop. A hardware store will not carry them. When you go to your local upholstery supply shop ask for staples compatible with Empire 7, BeA 71, Bostitch BA71, JK 670, Rainco 7, or Senco C series staplers. Amazon's price for replacement staples is good considering they are galvanized, but you can get liquor finish staples cheaper at your local store. Many will carry stainless steel staples as well.

This stapler does not come with a case because it is an industrial tool. Upholstery shops do not bother putting their tools in boxes at the end of the day. Also upholstery shops don't make a lot of saw dust, at least not in the fabric part of the shop. For those using this stapler in a general purpose shop, a case would be nice but, as mentioned,...
OUCH!...
I bought this stapler to re-cover the vinyl pillions and seats on my boat. And, approximately 8,000 staples later, I can say with certainty that it is definitely the ideal tool for any type of upholstery work. It's light, easy to hold, has an extended nose to get into tight spaces, and is powerful enough to completely sink the staple through several layers of fabric, even into hardwood. It's also extremely easy to re-load, and I've never experienced any type of jam or mis-fire. Construction is typical Porter-Cable (my personal favorite brand), meaning it appears to be built super tough--I expect it to last a lifetime.
So then, why only 4 stars? Unlike any other pneumatic 'nail gun' I've seen, this stapler does not have a safety tipped nose. Usually, the nose has to be pressed against something in order for the trigger to be functional. But, with this one, there is no safety tip--you just pull the trigger and it starts firing. Add to that the fact that the trigger is very...

Product Features :

• Uses standard Senco Type, 22 ga. 3/8-inch crown staples from 1/4-inch to 5/8-inch long
• Small and lightweight for ease of operation
• 1-inch nose extension for limited clearance fastening
• Steel top cap for durability
• Rear exhaust port channels air and tool oil/condensation away from user; Driver guide moves back with magazine, allowing jams to be easily cleared when magazine is open

Rating : 4.6
List Price : $162.43

Available at Amazon : Check Saved Price Now !

Read more...

Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler SALE

Hitachi N3804AB3 1-1/2-Inch 18-Gauge Narrow Crown Finish Stapler
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

soldering iron
I've used many brands of nail guns with various prices and qualities. The Hitachi Narrow Crown Finish Stapler definitely one of the best considering the low price. Light, and easy to use, it also has a switch for single shot or bump action which is wonderful. Most homeowner will feel much comfortable with single shot and able to check how many staple left with exposed rail. With a short practice, most people can gain most of the control of this staple and use it with ease. It has no problem driving 1 1/2 into wood and I felt it doesn't use much of air pressure as my compressor stay quiet longer than some other nail guns with similar capability.

The only thing I don't like is the kit does not come with sample staples and lubricant. It is not that I don't have them at home but it means the case does not design with designated places for those. minus one star for that.

Click here to read the full review for more information about this product.

Mighty Mouse
One thing I will add that the other reviewers did not mention is that this stapler packs a heck of a wallop. The power of this lightweight unit really amazed me.

The truth is, I did not know what to expect. I have never owned an air-powered stapler or nail gun. I planned to use this Hitachi stapler to put up kraft-faced insulation, and then later use it for trim work. Yeah, right. I loaded it with 0.50" staples. They went right through the paper tabs on the insulation and kept on going into the studs. I had to look hard to find them because they had been sunk so deeply.

I turned the air pressure down to 70 PSI, which is the minimum operating pressure and set the stapler's depth adjustment to minimum. No dice. Too powerful! I went back to using my Arrow T-50 Carpal Tunnel Syndrome Special.

I decided to get to know this little monster better. So I ran a test to see what it could do. I loaded it with 1.50" Senco staples and fastened a piece of...
excellent tool
The Hitach is a nice looking tool, light weight, and it is cool. When loading the bolt draws back and locks. Staples fit over the rail tightly, but slide smoothly, release button is easy to operate and positive (not sloppy).

The stapler needs at least fifty pounds of pressure, but will sink the 1.25 inch staples perfectly into pine at that setting. It uses little air, so the compressor isn't called on much.

In "automatic" bump mode this gun will shoot all day. I was stapling 3' lengths of chicken wire to a wooden frame. The gun has never jammed.

As much as I hate manual staplers, I love this tool!

It is a joy to use, and accurate. I highly recommend this tool.

Product Features :

• 1/2- to 1-1/2-inch 18-gauge narrow crown stapler with factory installed air fitting for convenience
• Selective actuation switch to choose between bump fire or sequential fire modes; tool free depth adjustment
• Tool-less, easy to clear nose for quick staple extraction; magazine holds up to 130 staples for efficiency; no-mar tip; 360-adjustable exhaust
• Includes safety glasses, air fitting, hex bar wrenches, and case
• 10.3-by-2.3-by-9.2-inches; 2.3-pounds; 5-year warranty
• 360-degree adjustable exhaust
• Comes with a 5-year limited warranty
• Easy clear nose
• No-mar tip and fitting
• Tool-free depth adjustment

Rating : 4.1
List Price : $170.52

Available at Amazon : Check Saved Price Now !

Read more...