Friday, January 25, 2013

Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor
Includes PC1010, 1 Gallon Electric Oil-Less Hand-Carry Compressor - PC1010Designed especially for finish and trim work as well as a variety of crafts and hobbies, the Senco PC1010 Compressor is a lightweight and ultra-quiet choice. This 1 HP compressor offers high performance in a compact, portable package and provides ample pressure for a wide range of small to medium jobs that require the use of pneumatic tools.




The Senco PC1010 Compressor:
  • Is easily portable at just 20 pounds.
  • Delivers 20 to 44 drives per minute.
  • Offers durability thanks to an aluminum cylinder.




The PC1010 is easily transported from site to site. View larger.


With 1 HP of power, the PC1010 lets you easily install door casings and floor molding.
Lightweight and Portable for Easy Maneuverability
Weighing in at just 20 pounds, the PC1010 is easy to carry from site to site as you work. And because it measures a compact 12.5 x 10.3 x 14 inches (WxHxD), it's ideal for jobs with limited work space. A cushioned handle grip makes it comfortable to carry and hold, and its compact size also means it won't take up too much room in your shop.

Efficient, Mess-Free Operation
Capable of delivering 20 to 44 drives per minute, depending on the tool and application, the PC1010 features a direct drive motor/pump that provides extra-efficient operation for a variety of jobs. And the pump is lube-free, which means you won't have to worry about the mess and disposal issues involved with working with oil. An aluminum cylinder offers reliable durability.

Versatile Enough for Both Professionals and DIYers
With a one-gallon capacity, the PC1010 is ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts. Additionally, it takes only 128 seconds to pump up and 35 seconds to recover, so you won't waste valuable time waiting to have enough power to complete your jobs.

Significantly quieter than pancake compressors, the PC1010 makes very little noise while running, so you won't have to worry about disturbing neighbors or waking napping babies while completing in-house jobs. And its rubber-covered feet won't scratch hardwood floors, so you can feel comfortable using it in your home.

The PC1010 is backed by a one-year warranty.

About Senco
For over 50 years, Senco Products, Inc. has provided high-quality products to make it easier for both professionals and remodelers to complete a wide variety of renovation, construction, and industry work. Based in Cincinnati, Ohio, with distributors worldwide, Senco is one of the leading manufacturers of pneumatic and powered fastening systems, as well as the fasteners they drive. Their tools boast superior workmanship and are used in a variety of industries, including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging.

What's in the Box
Senco PC1010 Compressor, regulator, pressure gauges, 1/4-inch universal coupler, and air filter.

With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.

Have compressor will travel
This is a great second compressor. I wouldn't buy this as a primary or first compressor but it works fine to support small nail guns. My other portable weighs 68 pounds and will keep up with 1 to 2 framing or roofing nailers. My shoulders ache from the number of times I have lugged it up 78 steps to a job site. This goes anywhere with a bunch of tools in the other hand.

Other than nail guns, NO it won't do much at 0.7 cu ft per min when paint spray guns need 10 times that, and a blow gun will empty the tank in 10 seconds or less. But seriously, this compressor gives me at least 10 shots from my 16 ga finish nailer before the motor kicks in; a couple more off of an 18 ga finish nailer, and as an acid test, I got 3 shots from a 3 1/4 inch framing nailer (not recommended but if all I need is 10 nails I'd rather carry this in - especially considering that my ripe old age keeps me from doing much serious hammering!)

Last word, the first one I received had a leaky reed valve and it had...

Click here to read the full review for more information about this product.


Easy on the arm!
As a general contractor I have several compressors. At least 90% of the time I grab an Emglo because they do everything I need except texturing. But I've grown fond of this little Senco WHEN IT IS USED PROPERLY! That means if I have a small trim project or a VERY small framing project it does the job, and both takes up less room and is a lot easier to pack around. It'll drive 3" framing nails no problem...when the tank is topped off, but the last couple nails before the compressor cycles always need to be hammer finished. Same is true for 15 or 18 gauge finish nails. When the tank is just about to cycle the nails don't completely set. My workers love the Senco...much to my chagrin. For one, it's light, and second...it takes FOREVER to refill (relatively speaking) and my guys love to stand there with their thumbs you know where taking a break every 10 to 15 nails or so! So if used for small jobs...or trim where you nail one piece at a time while cutting, well then it's a champ...
nifty little trim compressor
For my applications of easy carry in and out, it's been terrific for lightweight 18ga. finishing.

On a small renovation project yesterday, 4 doors jambs and trim were easy (1" to 2" 18/16ga brads) The very least of my problems was waiting for the little Senco to catch up. Been using it for about 5 months, shot about 10,000 brads. So far it's been flawless.

Very low noise as compressors go, and neat little rubber suction feet that keep it from skidding around and marring up a nice floor.
Senco PC1010 1-Horsepower Peak, 1/2 hp running 1-Gallon Compressor
Product Features :
  • Lightweight and portable--easy to carry from site to site as you work
  • One horsepower peak ,1/2 horsepower runningand one-gallon capacity
  • Ideal for a range of renovation and home improvement jobs, as well as for hobbies and crafts
  • Delivers 20 to 44 drives per minute
  • Backed by a one-year warranty

Rating : 4.4
List Price : $149.00

Available at Amazon : Check Saved Price Now !


0 comments:

Post a Comment