The Porter-Cable NS100B 1/2-inch to 1-1/4-inch 18-gauge Crown Stapler comes with a long-life, maintenance-free motor for added reliability and an internal piston catch for consistent maximum power on every shot. This stapler drives 18-gauge staples with a 1/4-inch crown from 1/2 to 1 inches in length. Its rear exhaust keeps contaminates away from the work and a tool-free depth-of-drive adjustment with detents for proper setting of staples adds ease of use. Other features include a split-nose design for easy removal of jammed staples, a sequential style trigger with lock off switch, and a removable non-marring nose tip. Operating at 70-to-120 PSI for added versatility, this stapler also features an adjustable belt hook, an integrated rubber grip, a lightweight die-cast aluminum body for improved comfort, a low staple reload indicator, a special hardened driver blade, and a 100-staple magazine capacity. This tool measures 8.76 x 10-1/4 inches and weighs 2.6 pounds. This stapler comes with 1,000 18-guage 1-inch staples, a 1/4-inch fitting, safety glasses, and a carrying case.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
SO FAR SO GOOD
January 21, 2012.
If this Porter Cable staple gun works for a very long time without breaking down, I will be most satisfied. I am building a boat and have a way to go.
The gun is very lightweight and easy to handle. It loads easily. I am using 5/8" staples. Press the release, slide the slide open, and load staples. Close the slide and allow it to snap shut. In front of the trigger a wheel allows the operator to set the staple deeper or shallower into the material, depending on use.
I purchased poly line separately and hooked up to a tiny compressor. After shooting ten or so staples the compressor turns on but manages to always keep up.
AUGUST 30, 2012 UPDATE:
After firing 21,000 staples, the gun broke. But to be fair with Porter Cable, I must add that I work with epoxies and use the gun to staple down plywood that has been epoxied. Therefore epoxy gets on and in the firing point of the gun. When purchasing a new stapler, I...
Click here to read the full review for more information about this product.
Great little stapler
Works very well at the prescribed air pressure. It never misses a lick. I use this gun every day building cabinets, jewelry boxes and other things. I have the 18ga brad nailer as well. The perfect pair in my little shop.
Crown Stapler
As advertised, looks good, well made, light cannot wait to start using it matches the other Porter Cable Tools I have.
Product Features :
- Long life maintenance-free motor to keep from staining the work surface
- Internal piston catch for consistent max power on every shot
- Rear exhaust to keep contaminants away from work
- Drives 18 ga. staples with 1/4-inch crown from 1/2-inch to 1-inch length Tool-free depth-of-drive adjustment with detents for proper setting of staples
- Included with stapler: 1,000 18-guage 1-inch staples, 1/4-inch fitting, safety glasses, and carrying case
Rating : 4.8
List Price : $167.74
0 comments:
Post a Comment