The Porter-Cable PN650 Palm Nailer Kit is a versatile pneumatic nail gun with a comfortable design and magnetic tip. This nailer will accept 1-1/4 to 6-1/2 inch nails (3d to 70d), and it comes with four different nose tips, including finishing tip, magnetic tip, wide nail tip, and steel hammer tip. Don't worry about driving the nail too deep, the PN650 features depth-of-drive control to make sure the nail gets set correctly. The nailer operates at 50-120 PSI and features a multi-blow firing mode--2,300 BPM at 100 PSI.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Palm Nailer Kit
Since nails must be inserted one at a time, this is not the best tool for someone with thousands of a specific type of nail to drive. However, it will serve in place of an array of nail guns for those who must drive a variety of different nails. In addition, it is safer since the nails are driven by successive blows rather than shot out of a gun.
Small finishing nails go in straight and can be driven flush with the wood surface. Countersinking is not possible since the driving blade is too big and leaves a mark, but it is a simple matter to countersink them by hand. The point of each nail is placed exactly where it is supposed to go, so accuracy is very good.
The biggest nails in my shop are serrated barn nails about 8" long, and this tool drove them through a 6x6 treated beam like shoving a knitting needle through styrofoam.
The hammer tip is good for pounding anything you would normally hit with a hammer. It drives wood through my doweling plate fast and I will probably...
Click here to read the full review for more information about this product.
This thing is great!
I have always used a framing hammer to nail joist hangers and usually on every job I bang my finger once or twice while trying to hold the hanger/nail and hammer. I used this tool for the first time today and was amazed at how smooth it is. It comes with quite a few different accessories for different types of nails and it comes with an air hose connection. I had to nail one hanger with only 5 1/2" between the hanger and the adjacent wall and the palm nailer handled this easily. I was expecting this tool to be rough on the hands but was surprised at it's smoothness and tons of power. This is a tool I wish I had bought years ago.
Ease of use with prior elbow injury
I am in the midst of building a deck. I and my partner have used this palm nailer from day one of construction. It is easy to use, very controllable.
Without this palm nailer I would have blown my elbow out with a conventional hammer and nails. Each joist hanger took 6 nails
Two hangers per joist=12 nails. 28 joists x 12= 536 + nails in hangers and all went in straight and without hesitation.
To date, this is the best purchase I have made that saves wear and tear on my elbow.
I recommended this for anyone who needs to drive an enormous amount of nails, especially through joist hangers where aim is critical through pre made holes..
V.M.Steel, NY
Product Features :
- Capacity from 1-1/4-inch to 6-1/2-inch (3d to 70d)
- Comes with four different nose tips
- No Mar finish tip: for finish nail up to 3d
- Magnetic tip: for driving 3d to 16d common nails
- Standard tip: for common nails up to 70d; Steel hammer kit: for moldings, dowels, automotive body work
Rating : 4.7
List Price : $235.20
0 comments:
Post a Comment