The Sharpe Dryaire Desiccant System removes dirt, water, oil and uncondensed moisture from compressed air lines and is ideal for painting applications. U.S.A. Filter Type: Filter that provides removal of water, contaminants down to 5 microns, Dimensions L x W x H (in.): 12 x 6 x 20, CFM: 30, Application: Desiccant system
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Sharpe Dessicant Filter System
This product shipped in a beautiful styro molded box. Arrived in great shape. It's mounted on the wall, hooked up, and keeps the air and oil from the air supply going to my equipment as advertised. The one thing that I wish they did differently is the bracket that holds this to the wall is a little flimsy. The three canisters with all the fittings are a little heavy for the tiny bracket around the center canister. I had to add an additional strap support twixt the large right canister and the regulator to keep it from listing to starboard.
Also, it would be nice to have a filter wrench thrown in so you can access the contents when necessary.
Other than these little nags the product is sturdy, well built and I expect to get years of use from it.
Click here to read the full review for more information about this product.
Get this one. Don't even consider the others.
I needed this for application of a special firearm finish. It was recommended to me by my local paint supply store, who also uses it, and I got it here for a lot less than $700 they were asking at the shop. 3-stage filter, cleans /very/ easily. All it takes is some elbow grease to unscrew the canisters and give them a quick shake and a drying out once a week or so. Extremely user friendly.
The added regulator on the end has two 1/4" NPT outlets that are great for hooking up extra hose- I run one to my paint gun and one to my sandblasting cabinet. The screw-valve is a pain to back in and out, but you can control pressure nearly to the pound, up from 5 to 120 PSI. I've run it for two months now without so much as a hiccough.
Don't use this by itself- you still need a good 15' of iron pipe to let the air cool and condense. If you try and run this straight from your compressor, especially for extended periods, you'll have to empty out the big canister and...
came as expected
came as expected. Shipped to Canada and through customs in less than a week.
Product Features :
- System maintains a -40deg F dew point while achieving 0% compressed air humidity
- Coalescer that removes oil and sub-micron particles down to .01 microns
- Provides maximum filtration capacity of 30 CFM @ 175 PSI
- Silica gel provides maximum moisture absorption with easy desiccant changeout
- Dessicant can be regenerated or replaced
Rating : 4.2
List Price : $621.75
0 comments:
Post a Comment